Yamato GB210-B 噴霧乾燥造粒機採用了出色的流化床乾燥技術，適用於複雜的粉末製粒和濕粉末的乾燥。我們的 GB210-B 多功能造粒噴霧乾燥機是基本單元 GB210 和 GF200 粉劑迷你床配件的組合。此外，透過安裝迷你噴霧附件 GF300，此多功能造粒裝置也可用於噴霧乾燥。
Phone
市話 04 22439623
傳真 04 22430827
Yamato多功能造粒噴霧乾燥機GB210-B
品牌：Yamato Scientific 大和科儀
產品型號：GB210-B
產品型號：GB210-B
- 熱風溫度、風量、黏合劑液流量等條件可透過噴霧乾燥裝置正面的設定旋鈕輕鬆設定
- 腔室採用超硬玻璃製成，使用者可以觀察流化床狀態或噴霧狀態
- 流量計、噴霧壓力計和室入口/出口溫度指示器可用於數據評估
- 透過安裝迷你噴霧附件 GF300（可選），裝置還可用於噴霧乾燥
- 標準配備自動升降裝置，方便安裝或拆卸玻璃室附件
Yamato多功能造粒噴霧乾燥機GB210-B特色
Yamato多功能造粒噴霧乾燥機GB210-B規格
| Model | GB-210B |
|---|---|
| Temp. adjusting unit setting range | 40 to 220°C (inlet temperature), 0 to 98°C (outlet temperature) |
| Temperature adjusting accuracy | Inlet temperature ±1°C |
| Spraying system | Two-way nozzle, Nozzle No. 1A as standard |
| Drying air amount adjusting range | 0 to 0.7 m³/min |
| Spray air pressure adjusting range | 0 to 0.3 MPa |
| Liquid sending pump flow rate range | 0 to 26 mL/min |
| External output | Inlet temperature, outlet temperature, temperature outlet (4-20 mA) |
| Automatic lift | Moving up/down of glass chamber automatic lift |
| Temperature adjusting device | PID digital |
| Touch panel | Blower, heater, liquid sending pump, pulse jet switch, error display |
| Control select switch | Inlet temperature, output temperature control switch (outlet temp. control is conditional) |
| Temperature sensor | K thermocouple |
| Heater | 2.0 kW (at 200V) to 2.88 kW (at 240V) |
| Liquid sending pump | Fixed amount peristaltic pump |
| Spraying air pump | Spraying air compressor (sold separately) is used. |
| Service outlet | For stirrer: AC100V, Max. 2A |
| Suction blower | Bypass blower, brushless DC motor |
| Filter | Suction filter, exhaust filter |
| Spray nozzle cooling mechanism | Connector: nipple x 2, O.D.:ø10.5 mm |
| Spray air connection diameter | Nipple diameter:ø7 mm |
| Exhaust connecting diameter | ø50 mm |
| Safety function | Inlet/outlet temperature overheat, sample feed reverse rotation mechanism, over current electric leakage breaker, nozzle connection error |
| External dimension WxDxH | 760 x 420 x 1350 mm |
| Weight | ~110 kg |
| Power supply | Single Phase AC200V~240V 50/60Hz 16~18A Switching of terminals necessary |
| Included accessories | Silicon tube (with a stopper) x 3, tiron tube (with a stopper) x 2, exhaust duct (with one hose band) x 1, outlet temperature sensor, spray air tube, sample box, static electricity removal earth, Teflon braided hose 5m (with two hose bands), a container table |
